Firmware and Software Upgrades

Firmware and Software Upgrades for BD950/BD960

	Filename Description Revision BD950V233.zip BD950 Operating Firmware 2.33 ConfigurationToolboxv6.6.1.zip BD950 Configuration Software 6.6.1 WinFlashCBD960v400.zip BD960/BX960 Operating Firmware 4.00 Note: BD960/BX960 changes since Revision 3.60 • Faster RTK initializations • OmniStar Library version 4.28 • Improved Ethernet configuration and reliability • Miscellaneous minor fixes MSController.zip Virtual Display for BD Series receivers 1.1.0.0

Firmware and Software Upgrades for ADL Radio Modems

	Filename Description Revision ADLCONF_2082_setup.zip ADLCONF Configuration Software 3.00.2082 adl_v_2_00_b_2071.zip ADL Modem Firmware 2.00.2071

Instructions for upgrading ADL software and firmware

1. Download the two upgrade zip files (ADLCONF_2082_setup.zip and adl_v_2_b_2071.zip) from the website and extract the contents of both zip files to a directory on your PC.
2. Uninstall any existing version of ADLCONF by clicking Start>Control Panel>Add or Remove Programs, clicking on “ADLCONF” and clicking the Change/Remove button.
3. Install the new version of ADLCONF by navigating to the upgrade directory and double-clicking “ADLCONF_2082_setup.exe”
4. Attach the ADL radio’s programming cable to power, your PC and the radio.
5. Launch ADLCONF and click File>Upgrade Modem Firmware. Navigate to the upgrade directory, select “adl_v_2_00_b_2071.bin” and click Open. Click OK on the Connect to ADL Radio dialog box. Upgrading modem firmware takes approximately 4 minutes. Do not detach the radio from its programming cable until the upgrade is complete. For help running ADLCONF configuration software, click Help>User Guide.

Firmware and Software Upgrades for PDL/EDL

	Filename Description Revision PDL2.40FW.zip PDL/EDL Operating Firmware 2.40 PDL2.42FW.zip PDL Operating Firmware 2.42 Note: if you are using any Trimble Survey equipment with PDL radios, you should use firmware version 2.42 on the PDL radio. PDLCONF.zip PDL Configuration Software 4.00 EDLCONF.zip EDL Configuration Software 1.21

Instructions for upgrading PDL firmware (also available on page 14 of the PDLCONF User Guide):

1. Download the PDL/EDL operating firmware into the directory where PDLCONF/EDLCONF is located. Note that some browsers may not properly download the firmware file. We recommend that you download the zipped version to avoid this problem.
2. Connect your PDL to your computer using the programming cable and run PDLCONF/EDLCONF.
3. After loading the configuration, click on the icon in the upper left-hand corner of the screen, and select "Upgrade modem firmware."
4. Specify the appropriate firmware revision in the dialog box and click OK. The firmware will be upgraded.

IMPORTANT NOTICE: PDLCONF revision 2.00/EDLCONF 1.00 or higher must already be installed in order for you to upgrade firmware. If your PDL firmware version is 1.03 or earlier, please contact Pacific Crest prior to attempting to upgrade your modem's firmware. To determine which firmware version you are currently using, attach your radio to your PC, run PDLCONF and click on the "Identification" tab.

For information concerning the PDL/EDL latest firmware revision history, click on the Readme.txt file.

Firmware and Software Upgrades for RFM/TM32

	Filename Description Revision RFMCONF RFM96W Modem Configuration Software 1.71 FREEPRG.EXE RFM96W Operating Firmware 5.06